
Brüel & Kjær is a renowned expert in sound and vibration solutions. With over 70 years of experience in the field, they have developed a wide range of products and services that cater to various industries.
Their expertise in sound and vibration measurement and analysis has led to the development of innovative solutions for noise and vibration control. This expertise is evident in their range of products, including microphones, sound level meters, and vibration transducers.
Their products are used in various applications, from industrial environments to research and development settings. This versatility is a testament to their commitment to providing solutions that meet the diverse needs of their clients.
Consider reading: Puget Sound Bridge and Dredging Company
Products
Brüel & Kjær has a long history of innovation in the field of measurement instruments. The company's products have been developed over several decades, with a focus on precision and accuracy.
In the 1940s, Brüel & Kjær produced its first instrument, the Type 2401 vacuum tube voltmeter. This was a significant milestone for the company.
The 1950s saw the development of sound and vibration measurement tools, including logarithmic level recorders, signal generators, and frequency analyzers. These instruments were designed to provide accurate measurements of sound and vibration levels.
One of the company's most notable achievements in the 1960s was the development of measurement microphones, preamplifiers, and calibrators. These instruments were used to measure sound levels with high precision.
The 1970s were marked by the introduction of parallel analyzers, including the first analyzer using digital filters. This innovation allowed for more accurate and efficient analysis of data.
Brüel & Kjær continued to innovate in the 1980s with the development of the first instrument for sound intensity measurement and dual channel FFT analyzers. These instruments provided new capabilities for measuring sound and vibration levels.
Here are some of the key products and technologies developed by Brüel & Kjær over the years:
- 1940s: Precision measurement instruments, including radio frequency analyzers and Geiger counters
- 1950s: Sound and vibration measurements tools, including logarithmic level recorders, signal generators, and frequency analyzers
- 1960s: Measurement microphones, preamplifiers, and calibrators, along with IEC standardised precision sound level meters
- 1970s: Parallel analyzers, including the first analyzer using digital filters
- 1980s: The first instrument for sound intensity measurement; dual channel FFT analyzers
- 1990s: Multichannel and multi-analysis systems, including acoustical holography array systems
- 2000s: Surface microphones, LAN-XI modular data acquisition hardware and TEDS, Dyn-X, REq-X technologies
The company's commitment to innovation and quality has made it a leader in the field of measurement instruments.
Aerospace and Defense
Brüel & Kjær supplies data acquisition systems and vibration test systems to customers in the aerospace industry, such as the LDS V994 shaker used to test NASA's Mars Curiosity rover.
Their systems have tested Astrium's satellite prior to launch and performed qualification and acceptance testing, like the integrated LAN-XI data acquisition systems used by the National Institute for Space Research in Brazil INPE.
Airbus, Aircraft Strength Research Institute, Boeing, EADS, Eurocopter, Rolls-Royce, and Sukhoi are main customers in this field.
Brüel & Kjær's tools help overcome noise and vibration challenges in aero engines, ensuring the quality of new lighter material applications through modal testing.
Systems for development and measurement of new noise-optimised engines, acoustic lining designs, and propagation code validation are also provided.
Flight-certified, high-temperature accelerometers are used for in-flight engine monitoring.
For another approach, see: Sizzle Acquisition
Noise Impact and Testing
Brüel & Kjær's expertise in noise impact and testing is impressive. They supply systems for occupational health, helmet/cabin/cockpit noise assessment, and human acoustic and vibration monitoring.
Their systems are used for urban noise monitoring, airport noise monitoring, industrial noise monitoring, and construction noise monitoring. This helps to assess and mitigate the environmental noise impact on local communities.
Brüel & Kjær also provides tools for recording, analysing, and synthesising sounds, enabling the use of simulation models and test data to improve sound quality and design desired sound characteristics into products.
Acoustic Stealth Discretion
Acoustic stealth discretion is crucial in various industries, especially in naval operations. The company provides systems for noise signature management, which is essential for reducing the detectability of submarines and surface ships.
Acoustic ranging of submarines and surface ships is a key aspect of noise signature management. This involves using acoustic sensors to measure the distance and speed of vessels, allowing for more accurate tracking and detection.
Noise source investigation during design and build is also a vital component of acoustic stealth discretion. By identifying and mitigating noise sources early on, manufacturers can create quieter vessels that are less detectable.
Acoustic trials and self-noise monitoring during operations are equally important. These processes help identify and address any noise-related issues that may arise, ensuring that vessels remain stealthy and effective.
The company's systems for underwater acoustics, shock testing, noise and vibration testing, and structural dynamics testing are also essential for achieving acoustic stealth discretion.
Environmental Noise Impact Testing and Monitoring
Brüel & Kjær supplies systems for occupational health, helmet/cabin/cockpit noise assessment, acoustic and human vibration monitoring, urban noise monitoring and noise-mapping of vehicles. These systems are used to test and monitor environmental noise impact on armed forces personnel and local communities.
Helmet/cabin/cockpit noise assessment is a crucial part of this process, helping to identify and mitigate noise-related issues. This can include assessing noise levels in helmets, cabins, and cockpits to ensure they meet safety standards.
Urban noise monitoring involves tracking and analyzing noise levels in urban areas to understand the impact of noise on local communities. This can include monitoring noise from traffic, construction, and other sources.
Airport noise monitoring is also an important aspect of environmental noise impact testing and monitoring. This involves tracking and analyzing noise levels at airports to ensure they meet safety and regulatory standards.
Vehicle noise mapping is another key component of environmental noise impact testing and monitoring. This involves using advanced technology to map and analyze noise levels from vehicles, helping to identify areas for improvement.
For your interest: Veolia Environmental Services
Testing and Validation
Brüel & Kjær provides measurement devices that focus on wind tunnel and test track measurements, which are essential for recreating real-world conditions for model and mule car testing.
These devices are specifically designed for vehicle pass-by noise contribution studies for cars, trucks, and trains, as well as the location of high-frequency engine noise sources and wind-tunnel measurements.
Surface microphones mounted on the exterior of a vehicle can measure pressure fluctuations at different positions without drilling holes, saving time and effort.
Brüel & Kjær's tools enable the use of simulation models and test data to develop modifications to improve sound quality and design the desired sound characteristics into products.
Consider reading: RF Micro Devices
Custom Sensors
In the world of testing and validation, custom sensors play a crucial role. They transform the value for the end-user by providing more than core functionality.
HBK creates custom OEM sensor solutions to deliver essential data for real-time feedback and control. This allows for precise testing and validation.
Smart products rely on custom sensors to unlock new markets and deliver a better user experience. By providing more data, these sensors enable real-time feedback and control.
These custom sensors are designed to meet specific needs, making them an essential tool in the testing and validation process.
You might like: Real Estate Asset Management Companies
Wind Tunnel Testing
Wind tunnel testing is a crucial step in recreating real-world conditions for model and mule car testing. It's often the only way to accurately test vehicles in a controlled environment.
Brüel & Kjær provides measurement devices that focus on wind tunnel testing for specific needs. This enables them to perform vehicle pass-by noise contribution studies for cars, trucks, and trains.
See what others are reading: Titan Wind Energy
Surface microphones mounted on the exterior of a vehicle can measure pressure fluctuations at different positions without drilling holes. This is a game-changer for noise testing.
Beamforming can be used for noise mapping at a distance from large objects. This saves time and effort in the testing process.
The data for all points can be acquired in a single measurement, which is a huge time-saver. This is especially useful in wind tunnel testing where multiple measurements need to be taken.
Take a look at this: T4F – Time for Fun
Applications and Industries
Brüel & Kjær's products cater to a wide range of industries, including telecom and audio. Their expertise spans from transducers to measurement, analysis, and reporting for electroacoustic devices.
In the telecom industry, Brüel & Kjær offers specialized standards-based telephone test systems for various communication technologies. These include GSM, UMTS, AMPS, CDMA, W-CDMA, Bluetooth, and VoIP.
Their products also serve the audio industry with ear and mouth simulators that are truly exceptional. These simulators are designed to provide accurate and reliable results.
Explore further: Brasil Telecom
Brüel & Kjær's solutions can be applied to various applications, such as development, benchmarking, production, and quality assurance testing. They also offer advanced material testing and modal analysis for sound quality and environmental procedures.
Here are some of the key areas where Brüel & Kjær's products can be applied:
- Telecom industry: GSM, UMTS, AMPS, CDMA, W-CDMA, Bluetooth, and VoIP
- Audio industry: ear and mouth simulators
- Development and production: material testing, modal analysis, sound quality, and environmental procedures
- Quality assurance testing: measurement, analysis, and reporting for electroacoustic devices
Organisational and Operational
Brüel & Kjær has undergone significant organisational developments over the years. The company was sold to AGIV in 1992 and split into several separate companies, including Brüel & Kjær Sound and Vibration Measurement A/S, Brüel & Kjær Vibro, and B-K Medical.
In 2000, the Spectris Division, which included Brüel & Kjær, was sold to the British company Fairey Group Ltd. The company continued to expand through acquisitions, including LDS Test & Measurement in 2009 and Lochard Ltd in the same year.
In 2020, Brüel & Kjær merged with Hottinger Baldwin Messtechnik and changed its name to Hottinger Brüel & Kjær.
Maintaining Operational Integrity
Maintaining Operational Integrity is crucial for any organisation, and it's great to see companies prioritising it. They provide products that aid preventative maintenance and manufacturer-specified checks to prolong the health of engines.
Real-time multi-analysis capabilities are a game-changer, reducing the number of run-ups/downs and gathering more data faster. This allows for more in-depth advanced analysis, maximising the up-time of aircraft.
High-temperature accelerometers are used to monitor the health of operational machinery, making maintenance, repair and overhaul tasks more efficient. These tasks include balancing, trim balancing, on-ground engine vibration checks, vibration diagnostics, and re-run production tests.
Monitoring systems for engines and gearboxes with permanently placed HUMS sensors and signal conditioners can handle extreme environments. This ensures that equipment is always running smoothly, even in harsh conditions.
The company also provides tools for recording, analysing, and synthesising sounds, which is useful for developing modifications to improve sound quality. This enables the design of desired sound characteristics into products.
Organisational Developments
Brüel & Kjær underwent significant organisational changes in the 1990s. The company was sold to AGIV in 1992 and split into five separate companies.
One of the split companies was Brüel & Kjær Sound and Vibration Measurement A/S, which focused on the core sound and vibration market. Another company, Brüel & Kjær Vibro, specialized in machinery condition monitoring.
A number of former employees left to form G.R.A.S. Sound and Vibration after the division of the company. AGIV included the Brüel & Kjær split companies within its Spectris Division.
The Spectris Division was sold to Fairey Group Ltd in July 2000 and later changed its name to Spectris Plc in May 2001. Brüel & Kjær acquired LDS Test & Measurement in January 2009 and Lochard Ltd in February 2009.
In 2020, Brüel & Kjær merged with Hottinger Baldwin Messtechnik and changed its name to Hottinger Brüel & Kjær. In 2021, Spectris acquired Concurrent Real-Time for $166.7 million and it became a division of Brüel & Kjær in July 2021.
For another approach, see: What Is a S Corporation
Featured Images: pexels.com
