Trump Tariff Timeline: Key Dates and Rules

Author

Reads 1.1K

Scrabble tiles spelling 'China' and 'Tariffs' symbolize global trade issues.
Credit: pexels.com, Scrabble tiles spelling 'China' and 'Tariffs' symbolize global trade issues.

The Trump Tariff Timeline is a complex and ever-changing landscape, but don't worry, we've got you covered. The first major tariff announcement was made on March 1, 2018, when the US imposed a 25% tariff on steel imports and a 10% tariff on aluminum imports.

Tariffs were applied to over 1,300 Chinese goods on July 6, 2018, with a list of 34 products added on August 23, 2018. The tariffs were increased to 25% on May 10, 2019, for over 2,000 Chinese goods.

The US imposed a 25% tariff on EU goods on June 22, 2018, and a 25% tariff on Canadian aluminum and steel on June 1, 2018.

A different take: Trump Tariff Feb 1

Tariff Imposition Dates

February 25 is the date when Trump signs an executive order considering a tariff on imported copper for national security reasons.

March 4 marks the day when Trump's 25% tariffs on imports from Canada and Mexico go into effect, with some exceptions for Canadian energy and a doubling of tariffs on Chinese imports to 20%.

Credit: youtube.com, A timeline of Donald Trump's tariffs

March 10 is the day when China's retaliatory 15% tariffs on key American farm products take effect.

March 12 is the day when Canada announces plans to impose retaliatory tariffs worth Canadian $29.8 billion on U.S. imports.

March 26 is the day when Trump says he is placing 25% tariffs on auto imports, which will start being collected on April 3.

April 2 is the date when Trump announces his long-promised "reciprocal" tariffs, including higher rates for dozens of nations that run trade surpluses with the U.S.

Here's a list of key tariff imposition dates:

  • February 25: Trump signs executive order on copper tariffs
  • March 4: Trump's tariffs on Canada and Mexico take effect
  • March 10: China's retaliatory tariffs on farm products take effect
  • March 12: Canada announces retaliatory tariffs
  • March 26: Trump announces auto tariffs
  • April 2: Trump announces reciprocal tariffs
  • April 3: Auto tariffs start being collected

February 25

February 25 was a busy day for Trump's trade policies. He signed an executive order instructing the Commerce Department to consider whether a tariff on imported copper is needed to protect national security.

The order cited copper's use in U.S. defense, infrastructure, and emerging technologies as reasons for the potential tariff.

Canada and Mexico, along with other countries, were not spared from higher tariffs, with India and European nations also on the list.

June 3

Credit: youtube.com, Trump's TACO Move On China: Trump Signals POSSIBLE Tariff CUT on China | 'BUY Our Soybeans..'

On June 3, Trump doubled his tariff on steel and aluminum imports from all countries, to 50 per cent. This move was particularly significant for Canada, as it is the top supplier of both products to the U.S.

The new tariff threat was met with criticism from Canada's steel industry, with the Canadian Steel Producers Association calling it a "punch in the gut." The impact of this decision will be felt across the Canadian economy, particularly in industries that rely heavily on steel and aluminum imports.

The doubling of tariffs on steel and aluminum imports from all countries has significant implications for trade between the U.S. and other countries. It's essential for businesses and individuals to stay informed about these changes to adapt their strategies accordingly.

Here's a list of countries that will be affected by the new tariffs:

  • Canada (top supplier of steel and aluminum to the U.S.)
  • Other countries that export steel and aluminum to the U.S.

The new tariffs will likely lead to retaliatory measures from affected countries, further escalating the trade tensions between the U.S. and its trading partners.

July 10

Credit: youtube.com, Stocks Tumble on Trump's Tariff Threats | The Close 10/10/2025

July 10 was a significant day in the context of tariffs. Trump threatened to boost the tariff on Canadian goods to 35 per cent, effective August 1.

The threat was made in a letter posted on his Truth Social platform. Trump explicitly stated that he would consider adjusting the tariff if Canada worked with him to stop the flow of Fentanyl.

Here is a summary of the key points:

  • Trump threatened 35% tariffs on Canadian goods across the board.

Tariff Exemptions

Goods subject to the savings clause are exempt from reciprocal tariffs if they meet specific criteria, including being loaded onto a vessel at the port of loading and in transit on the final mode of transit before August 7, 2025, and entered for consumption or withdrawn for warehouse for consumption before October 5, 2025.

The savings clause does not apply to goods subject to the 10% baseline reciprocal tariffs.

Goods subject to Section 232 tariffs on aluminum and steel, automobiles, automobile parts, and semi-finished copper and intensive copper derivative products are also exempt.

Credit: youtube.com, 'APOCALYPTIC PREDICTIONS': Major US bank makes suspicious claim about Trump's tariffs

The additional articles listed in Annex II to Executive Order 14257, including copper, pharmaceuticals, semiconductors, lumber articles, certain critical minerals, and energy and energy products, are exempt as well.

Here are the specific items exempt from reciprocal tariffs:

  • Goods subject to the savings clause
  • Goods subject to Section 232 tariffs on aluminum and steel, automobiles, automobile parts, and semi-finished copper and intensive copper derivative products
  • The additional articles listed in Annex II to Executive Order 14257

Tariff Application Rules

To apply for a tariff, you'll need to file a petition with the International Trade Commission (ITC). This can be a lengthy process, taking up to 120 days.

The ITC will review the petition and determine if the proposed tariff is likely to cause harm to US industries. If so, the ITC will recommend the tariff to the President.

The President has the final say in imposing tariffs, but they must follow the Trade Expansion Act of 1962, which requires them to consider the impact on US industries and consumers.

Tariff Stacking

Tariff stacking can be a complex topic, but don't worry, I've got the lowdown.

General duties, antidumping or countervailing duties, Section 301 tariffs on Chinese-origin goods, and "fentanyl" tariffs on Chinese-origin goods always stack on top of any other applicable tariffs.

Credit: youtube.com, Supreme Court to quickly rule on Trump’s sweeping tariffs

If you're shipping automobiles, bus, medium- and heavy-duty vehicle (MHDV), or MHDV parts, be aware that these tariffs do not stack on top of other Section 232 tariffs, reciprocal tariffs, or "fentanyl" tariffs on Canadian- or Mexican-origin goods.

The aluminum and steel tariffs can stack on top of each other if the product is subject to both.

The aluminum, steel, copper, and lumber tariffs do not stack on top of reciprocal tariffs or "fentanyl" tariffs on Canadian- or Mexican-origin goods.

Here's a quick rundown of the stacking rules for different tariffs:

6

If you're dealing with tariffs and exemptions, it's essential to understand the rules of the game. Trump granted a one-month exemption on his new tariffs impacting goods from Mexico and Canada for U.S. automakers on March 5.

U.S. automakers like Ford, General Motors, and Stellantis benefited from this exemption. The exemption was granted after the president spoke with the leaders of these companies.

Credit: youtube.com, 'Full blanket assault': Trump's tariff turmoil continues on 6 new countries 

Tariffs on Canada came into force on March 6, but Trump amended his executive order just two days later. This amendment gave an exemption for products that comply with the terms of the Canada-U.S.-Mexico Agreement (CUSMA).

The exemption covers nearly 90 per cent of Canadian exports to the U.S., which means the vast bulk of products can cross the border tariff-free. This was a significant development in the tariff war between the U.S. and Canada.

Prime Minister Mark Carney met with Trump at the White House on May 6. Carney pressed Canada's case for the removal of tariffs, but Trump gave no sign he was changing his mind on the issue.

Tariff Thresholds

In 2018, the US imposed tariffs on imported steel and aluminum, with a 25% tariff on steel and a 10% tariff on aluminum, but exempted Canada and Mexico.

The tariffs were imposed in response to a Section 232 investigation, which found that imports of steel and aluminum were threatening national security.

Credit: youtube.com, Trump touts MASSIVE tariff revenue: ‘It’s a miracle what’s happening’

The US also imposed a 10% tariff on $200 billion worth of Chinese goods, with a 25% tariff on $50 billion worth of Chinese goods.

The tariffs were part of a broader trade war between the US and China, which had been escalating for months.

The US imposed a 25% tariff on $34 billion worth of Chinese goods in July 2018, and a 25% tariff on an additional $16 billion worth of Chinese goods in August 2018.

The tariffs on Chinese goods were imposed in response to China's alleged theft of US intellectual property and technology.

The US also imposed a 10% tariff on $300 billion worth of Chinese goods in September 2019, and a 15% tariff on $120 billion worth of Chinese goods in December 2019.

Here's an interesting read: Trump Tariff on China

Angie Ernser

Senior Writer

Angie Ernser is a seasoned writer with a deep interest in financial markets. Her expertise lies in municipal bond investments, where she provides clear and insightful analysis to help readers understand the complexities of municipal bond markets. Ernser's articles are known for their clarity and practical advice, making them a valuable resource for both novice and experienced investors.

Love What You Read? Stay Updated!

Join our community for insights, tips, and more.