
Impaired assets in business accounting can be a complex and nuanced topic, but it's essential to understand the basics. An impaired asset is a non-cash asset, such as property, plant, and equipment, that has decreased in value due to various factors.
This decrease in value can be caused by a decline in market value, physical deterioration, or other economic factors. The asset's carrying value exceeds its recoverable amount, which is the amount that can be recovered through its use or sale.
Businesses must identify and classify impaired assets to accurately reflect their financial position. Impaired assets can be found in various industries, including manufacturing, retail, and construction.
You might like: In Computing Depreciation Salvage Value Is
Related reading: Asset Forfeiture
What Is Impaired Asset
An impaired asset is a financial term that refers to an asset whose book value is higher than its fair market value. This means the asset can't be sold for what it's worth on the open market.
To determine if an asset is impaired, a company must calculate its fair market value and compare it to its book value.
Take a look at this: Hard Asset Equipment Online Auction Market
A value below the book value indicates an impairment, while a value equal to or above the book value does not. This is the general threshold for impairment under generally accepted accounting principles (GAAP).
If an asset is determined to be impaired, it can be written down, unless otherwise excluded by the Internal Revenue Service or GAAP.
Assets must be properly valued in accordance with GAAP, and groups of similar assets should be tested together, with the testing set at the lowest level of identifiable cash flows considered independent of other assets.
The main difference between IAS 36 and ASC 360-10 is that IAS 36 requires annual goodwill impairment testing, whereas ASC 360-10 does not.
You might enjoy: Total Assets - Total Equity / Total Assets
Causes of Impairment
Causes of impairment can be triggered by various factors. Market decline can cause sharp drops in asset values, such as a mass exodus of people from a region due to adverse climate change.
Technological advancements can lead to obsolescence, rendering assets useless. For instance, the Walkman was replaced by the Discman, and streaming services replaced the Discman on our phones.

Physical damage, such as a fire or natural disaster, can render assets useless. Regulatory changes, such as changes in environmental law, can also hurt the value of an asset.
Here are some common causes of impairment:
- Market decline: A sharp drop in asset values due to changes in market conditions.
- Technological obsolescence: Assets become useless due to outdated technology.
- Physical damage: Assets are rendered useless due to physical damage, such as a fire or natural disaster.
- Regulatory changes: Changes in regulations or laws can hurt the value of an asset.
A significant change in how an asset is used can signal the need for impairment testing. Physical damage or obsolescence can impact an asset's ability to generate future economic benefits. Changes in technology or the business environment can also diminish the usefulness of an asset.
Testing and Measurement
To determine if an asset is impaired, a company must follow a two-step process. This involves comparing the asset's carrying value to the undiscounted future cash flows expected from the asset, and if the carrying value exceeds the undiscounted cash flows, proceed to step 2.
In step 2, the company calculates the asset's fair value, and recognizes an impairment loss for the excess of the carrying value over the fair value. The impairment loss is recorded as an expense on the income statement, which reduces net income for the period.
For another approach, see: Asset Management Company Financial Statements
Companies can use various valuation methodologies to estimate an asset's fair value, such as market comparables, discounted cash flows, or replacement costs. Judgment is involved in determining fair value.
To test for impairment, first the asset's recoverable amount must be determined. This is the higher of the fair value less costs to sell, or the value in use.
Here are the key steps to determine the recoverable amount:
- Estimate future cash flows the asset is expected to generate over its remaining useful life
- Determine an appropriate discount rate to calculate the present value of those estimated future cash flows
- Compare the present value to the asset's current carrying value on the balance sheet
- If the present value is less than the carrying value, an impairment charge may be required
The impairment loss is calculated as the excess of the carrying value over the recoverable amount. This loss is recorded as an expense on the income statement, which reduces net income for the period.
Companies are required to disclose key assumptions and sensitivities used in impairment testing. This includes the assumptions made about future cash flows, discount rates, and the useful life of the asset.
Curious to learn more? Check out: Income (United States Legal Definitions)

A company must also consider the effects of economic downturns and events like pandemics or natural disasters on asset values when testing for impairment. This involves comparing the asset's book value to the net income it generates or its fair market value.
In some cases, a company may need to reverse an impairment loss if conditions improve. This involves recalculating the recoverable amount and adjusting the carrying value of the asset accordingly.
Additional reading: Cash Realizable Value
Financial Impact
Calculating and recording an impairment of financial assets can have a significant financial impact on your business. Your accounting books and financial records must be updated to reflect the accurate value of your business's profitability.
A substantial and prolonged decline in the market value of an asset below its carrying value on the balance sheet may signify impairment. This can lead to reduced net income in the current period by the amount of the impairment loss.
The impairment loss is recorded by debiting Impairment Loss Expense on the income statement and crediting Accumulated Depreciation (for the impaired asset's specific account). This reduces the asset's carrying value on the balance sheet to its new recoverable value.
Broaden your view: Mirae Asset Financial Group
For example, if the impairment loss is $10,000, you would debit Impairment Loss Expense $10,000 and credit Accumulated Depreciation—Equipment $10,000.
Factors to analyze when considering the market value impact include:
- The magnitude and duration of the value decline
- Volatility in the market and whether changes are temporary
- The reason for the decrease and if they relate to adverse economic or company-specific events
These factors can help you determine if the market value reduction is significant and sustained enough to foreshadow asset impairment.
Accounting and Recording
Calculating and recording an impairment of financial assets is crucial to ensure accurate financial records. You must update your accounting books and financial records when an asset is impaired, otherwise, your records will be inaccurate and depict a false value of your business's profitability.
To calculate impairment, compare the assets' current fair value to their carrying value on the financial statements. If the fair value is less, this suggests impairment. For instance, if a bulldozer originally cost $100,000 but its market value has dropped to $30,000 due to damage, a $70,000 decline triggers an impairment test under accounting rules.
Here's an interesting read: Impairment (financial Reporting)
Impairment loss is recorded as an expense on the income statement, reducing the asset's value on the balance sheet to its new fair market value. This ensures assets are not overvalued on financial statements.
If impairment is confirmed, the company would write down the bulldozer's book value by $70,000, recording this as an impairment loss expense on their income statement.
Here are the key steps involved in accounting for goodwill impairment:
- Determine the carrying value of the reporting unit that contains the goodwill. This includes assets, liabilities, and goodwill.
- Establish the fair value of the reporting unit. This is generally done using valuation models like discounted cash flow analysis.
- Compare the fair value to the carrying value. If the carrying value exceeds the fair value, there is a potential goodwill impairment.
- Calculate the implied fair value of goodwill by deducting the fair values of all other net assets from the reporting unit's fair value. Compare this to the carrying amount of goodwill.
- If the carrying amount of goodwill is higher than the implied fair value, record an impairment charge for the difference.
In an example, a company may need to record an asset impairment loss of $300,000 when the fleet's value has decreased to $200,000, much lower than its carrying value of $500,000.
Impairment Determination
To determine if an asset is impaired, a company must first calculate its fair market value. This value is compared to the asset's book value recorded on the balance sheet.
A value below the book value indicates an impairment, while a value equal to or above the book value does not. The general threshold for impairment is the inability to recover the book value amount.
Companies must properly value their assets in accordance with Generally Accepted Accounting Principles (GAAP). This ensures that the asset is valued at its fair market value.
Groups of similar assets should be tested together, with the testing set at the lowest level of identifiable cash flows considered independent of other assets.
Here's a key step to keep in mind: if an asset is determined to be impaired, it can be written down unless otherwise excluded by the Internal Revenue Service or GAAP.
Goodwill and Intangible Assets
Goodwill and intangible assets can be tricky to understand, but let's break it down. Intangible assets include patents, goodwill, trademarks, and copyrights. These assets are impaired when their fair value is less than their value on the balance sheet after amortization.
Companies must report the impairment of intangible assets and fixed assets under GAAP. This means they need to assess the fair value of these assets regularly. The frequency of testing differs between US GAAP and IFRS.
Curious to learn more? Check out: Intangible Asset Finance
To test for goodwill impairment, companies need to determine the carrying value of the reporting unit that contains the goodwill. This includes assets, liabilities, and goodwill. They also need to establish the fair value of the reporting unit using valuation models like discounted cash flow analysis.
Here are the key steps involved in accounting for goodwill impairment:
- Determine the carrying value of the reporting unit that contains the goodwill.
- Establish the fair value of the reporting unit.
- Compare the fair value to the carrying value. If the carrying value exceeds the fair value, there is a potential goodwill impairment.
- Calculate the implied fair value of goodwill by deducting the fair values of all other net assets from the reporting unit's fair value.
- Compare this to the carrying amount of goodwill. If it's higher, record an impairment charge for the difference.
IAS 36 outlines detailed methodology for identifying impaired assets, measuring recoverable amounts, recognizing and reversing impairment losses, and disclosures.
Calculations and Formulas
Impairment can have a significant impact on a business's balance sheet and financial ratios, and accurate calculations are crucial to ensure fair and transparent accounting.
To calculate impairment, you need to determine the asset's carrying amount, which is typically the asset's original cost less accumulated depreciation to date.
The formula to calculate impairment of an asset is: Impairment Loss = Carrying Amount of Asset - Recoverable Amount.
The recoverable amount is the higher of the asset's fair value less costs to sell and value in use.
Discover more: Formula for Calculating Total Assets
For example, if a piece of equipment was purchased for $100,000 and has been depreciated to a carrying value of $60,000, but its fair value is now $30,000, there is an impairment loss of $30,000 that must be recorded.
Here's a breakdown of the formula:
- Carrying Amount: $60,000
- Recoverable Amount: $30,000 (fair value)
- Impairment Loss: $60,000 - $30,000 = $30,000
The journal entry for this impairment loss would be: Impairment Expense = $30,000, Accumulated Depreciation = $30,000.
To calculate the value in use of an asset, companies follow these key steps:
1. Estimate future cash flows from the asset over its remaining useful life.
2. Determine an appropriate discount rate to calculate the present value of those estimated future cash flows.
3. Calculate the present value of the future cash flows by applying the discount rate.
4. Compare the value in use to the asset's current carrying value on the balance sheet.
Here's a summary of the key steps:
Reversal of Losses
You can reverse an impairment loss if the asset's value improves. This can happen when the asset's value increases significantly, you use the asset more, or its performance improves.
Reversing an impairment loss is only allowed under IFRS, not under US GAAP. To record a reversal under IFRS, you debit Accumulated Depreciation and credit Impairment Loss Reversal on the income statement.
The reversal increases net income and restores some or all of the previously recognized impairment loss. The asset's carrying value is increased accordingly.
Reversals are limited to the amount needed to restore the pre-impairment carrying value. Goodwill impairment can never be reversed.
Suggestion: Comprehensive Income
Comparison and Standards
GAAP and IFRS have different approaches to accounting for impaired assets. GAAP uses a two-step model, while IFRS uses a one-step model.
The two main accounting methods used globally, GAAP and IFRS, have distinct differences in treating asset impairment. GAAP is primarily used in the U.S., while IFRS is used in the rest of the world.
Under GAAP, impairment needs to be determined by comparing the asset's carrying value to its expected future cash flows. If the carrying value is higher, the asset is impaired.
Additional reading: Capital Asset Pricing Model
IFRS, on the other hand, requires determining the difference between an asset's carrying value and its recoverable amount. The recoverable amount can be either its fair value or its value in use.
Here are the key differences between IFRS and US GAAP in impairment accounting:
- Measurement of Impairment: IFRS uses a one-step model, while US GAAP uses a two-step model.
- Timing of Testing: IFRS requires testing whenever there is an indication of impairment, while US GAAP sets specific events that automatically require impairment testing.
- Reversals of Impairment: IFRS allows impairment losses to be reversed in future periods if conditions improve, while US GAAP prohibits reversal of impairment losses for most assets.
- Goodwill Impairment: Under IFRS, goodwill must be allocated to cash generating units and tested annually for impairment, while US GAAP allows testing at the reporting unit level first and impairment is recognized only if fair value is less than carrying value.
Featured Images: pexels.com


