
The Herfindahl–Hirschman Index is a powerful tool for measuring market concentration. It's calculated by squaring the market share of each firm in the market and summing these values.
The resulting number is then divided by the square of the total market share, which gives us a numerical value between 0 and 1. This value indicates the level of market concentration.
A high HHI value, typically above 0.25, indicates a highly concentrated market with a few large firms dominating the market. Conversely, a low HHI value, typically below 0.01, indicates a highly competitive market with many small firms.
This index is widely used by regulatory agencies, such as the US Department of Justice, to determine whether a market is competitive or not.
Related reading: Highly Confident Letter
HHI Definition
The Herfindahl-Hirschman Index (HHI) is a widely used measure of market concentration that can be used to determine market competitiveness. It's a key concept in antitrust laws.
The HHI was first proposed in 1945 by Albert Hirschman and later popularized in the 1950s by Orris Herfindahl. The measure is named after these two economists.
Related reading: Bahfa Bond Measure
The HHI definition is straightforward: it's the sum of the market shares (expressed as a percentage) of all enterprises operating in a particular market (branch of industry) after they have been squared. This means that if a company has a large market share, it will have a bigger impact on the HHI score.
The value of the HHI ranges from 10,000 / n (in the case of perfect competition) to 10,000 (in the case of a full monopoly). This gives us a clear idea of the scale of market concentration.
Here's a rough guide to help you understand the HHI scale:
Note that the exact thresholds may vary depending on the industry and market conditions.
Formula and Calculation
The Herfindahl-Hirschman Index (HHI) is a measure of market concentration, and it's calculated using a simple formula. The formula involves squaring the percentage market share of each firm in an industry and adding all the squares together.
To calculate the HHI, you take the percentage market share of each firm, square that number, and then add all the squares together. This is done using the formula: HHI = S1^2 + S2^2 + ... + Sn^2, where S1, S2, etc. refer to the percentage market share of each firm.
The HHI can also be expressed as a function of the concentration ratio, CRm. This is done using the formula: H = 1/2(LH + UH) ± 1/2(UH - LH), where LH and UH are the lower and upper bounds of the HHI, respectively.
The lower bound LH is given by the formula: LH = CRm^2 / m, and the upper bound UH is given by the formula: UH = CRm^2 for CRm ≥ 1/m, and UH = CRm^m for CRm ≤ 1/m.
The concentration ratio CRm can also be expressed in terms of the HHI, using the formula: UCRm = mH and LCRm = H / m^2. This means that the upper and lower bounds of CRm are equal to mH and H / m^2, respectively.
Here is a summary of the formulas:
Market Structure Appearance
The Herfindahl-Hirschman index (HHI) is a powerful tool for analyzing market structure. It arises as a natural consequence of assuming Cournot competition in a market.
In a Cournot model, firms with different linear marginal costs and a homogeneous product compete with each other. The profit of each firm, πi, is determined by the price of the product, P(Q), the quantity produced by each firm, qi, and the marginal cost of production, ci.
The derivative of the firm's profit function with respect to its output is maximized when the profit margin is equal to the price elasticity of demand, η. This can be represented as: P− − ciP=− − dPdQqiP.
The Herfindahl index, H, is directly related to the weighted average of the profit margins of firms under Cournot competition. It's calculated by multiplying each firm's profit margin by its market share, si.
In a market with n firms, the Herfindahl index can be represented as: s1(P− − c1P)+⋯ ⋯ +sn(P− − cnP)=Hη η.
Herfindahl-Hirschman Scale
The Herfindahl-Hirschman Scale is a crucial tool in measuring market concentration. It ranges from 1 (least concentrated) to 10,000 (most concentrated), with the latter representing a single company holding 100% of the market share.
The U.S. Department of Justice uses the HHI to categorize industries into low, moderate, and highly concentrated. An HHI below 1,500 indicates low concentration, while a value above 2,500 suggests a highly concentrated industry.
To determine the impact of a merger on market concentration, the U.S. Department of Justice looks for an increase of more than 200 points in the HHI. If this occurs, the transaction is subject to greater scrutiny to ensure it doesn't lead to an excessively monopolistic scenario.
A general rule of thumb is to consider the impact of a merger on the overall HHI value. If the increase is significant, it may raise concerns about the deal's potential effects on the market.
Here's a breakdown of the HHI classification:
- < 1,500: Low concentration
- 1,500-2,500: Moderate concentration
- > 2,500: Highly concentrated
Introduction and Theory
The Herfindahl-Hirschman Index (HHI) is a widely used measure of market concentration that helps determine market competitiveness. It's a crucial tool for regulators to monitor the potential impact of mergers and acquisitions on an industry.
Market concentration and market competitiveness are the economic concepts behind antitrust laws. The HHI definition is based on the sum of the market shares of all enterprises operating in a particular market, expressed as a percentage, after they have been squared.
The value of the Herfindahl-Hirschman Index ranges from 10,000 / n (in the case of perfect competition) to 10,000 (in the case of a full monopoly). This means that the lower the HHI, the more competitive the market.
A highly concentrated industry is one where only a few players hold a large percentage of the market share, leading to a near-monopolistic situation. Conversely, a low degree of concentration means that the industry is closer to a perfect competition scenario, where many firms of more or less equal size share the market.
Check this out: Perfect World (company)
The HHI is used to monitor the potential impact of mergers and acquisitions on an industry. It's a quantitative measure that regulators can cite to veto an M&A transaction.
Here's a rough guide to the HHI range:
The lower the HHI, the more power consumers hold in that industry, which usually leads to lower prices and compressed company margins.
You might like: Lowering Medical Bills
Results
The results of a simulation study on the Herfindahl-Hirschman index (H) are quite fascinating. 10,000 market-share distributions were generated using a computer algorithm to randomly generate random numbers within specific intervals.
The distributions were created with a varying number of firms (n) between 5 and 100. A total of 10,000 such distributions were generated, and the corresponding values for H and CR4 were computed.
A scatter diagram was used to visualize the relationship between H and CR4, with CR4 being the four-firm concentration ratio. This was chosen because it's the most widely used concentration ratio in the field.
The CR4 ratio was calculated for each of the 10,000 distributions, and the results were plotted in a scatter diagram (Fig. 1).
Additional reading: Does Pa Tax Inherited Ira Distributions
Tables and Figures
The data in Table 1 provides a wealth of information about the Herfindahl–Hirschman index. This table contains 20 data sets, each with 9 variables.
The table includes data sets with varying sizes, ranging from 16 to 98, and corresponding values for CR4, H, H1, CR41, H2, H3, H4, and other variables.
A different take: China Sets Worth Money
Table 1
Table 1 is a crucial part of the article, providing a wealth of data on various datasets. Each dataset is represented by a unique number, ranging from 1 to 25.
The number of observations in each dataset varies, with the smallest having 16 observations and the largest having 98 observations. For example, dataset 6 has 16 observations, while dataset 20 has 98 observations.
A closer look at the data reveals some interesting patterns. The values for CR4, a measure of concentration, range from 0.0535 to 0.9666. This is evident in datasets 2 and 6, respectively.
The values for H, another measure of concentration, range from 0.0125 to 0.5764. This is also evident in datasets 2 and 6, respectively.
Here is a summary of the minimum and maximum values for CR4 and H:
These values are crucial in understanding the relationships between the different measures of concentration.
Table 2
Table 2 is a treasure trove of data, with 16 entries showcasing the values of CR4, H, H1, H1•, CR41, CR41•, H3, and H4 for various market-share distributions.
The values of CR4 and H in Table 2 are generally much larger than those in Table 1, which is likely due to the smaller values of n that affect the generated market-share distributions.
Here's a breakdown of the data in Table 2:
The estimated values of H based on CRm and those of CRm based on H in Table 2 could probably be improved upon by considering different weights for the two pairs of bounds.
Usage and Implementation
The Herfindahl-Hirschman Index is a powerful tool used by antitrust authorities to assess market concentration. It's a simple measure that can be calculated with just a small amount of data.
The HHI is used to determine whether a proposed merger is likely to raise antitrust concerns. For example, the European Commission uses changes in the HHI index when assessing mergers and acquisitions.
Here's an interesting read: Payment Card Interchange Fee and Merchant Discount Antitrust Litigation
The HHI is calculated based on the market share of each company in an industry. A high value indicates a monopolized industry, while a low value shows a highly competitive market. In fact, if there were only one huge company in an industry, its HHI value would be 10,000.
Here are the key thresholds for the HHI:
- HHI below 100 indicates a highly competitive industry;
- HHI between 100 and 1,500 indicates an unconcentrated industry;
- HHI between 1,500 to 2,500 indicates moderate market concentration; and
- HHI above 2,500 indicates high market concentration.
Usage
The Herfindahl-Hirschman Index (HHI) is a widely used tool in assessing market competitiveness. It's a simple measure that only requires a small amount of data.
HHI values range from 0 to 10,000, with higher values indicating a monopolized industry and lower values showing a highly competitive market. For example, if a company has 100% of the market share, the HHI value would be 10,000.
Here's a breakdown of HHI values and their corresponding market concentration levels:
In practice, the HHI is used by antitrust authorities to assess the impact of mergers and acquisitions. For example, if a merger increases the HHI by over 100 points, especially in an already highly concentrated market, it may raise antitrust concerns.
Suggestion: High-Tech Employee Antitrust Litigation
Has CRM Function

Has CRM Function?
A very approximate relationship can be formulated between H and CRm in terms of the lower bound LH and the upper bound UH. This relationship is expressed as H=12(LH+UH)±12(UH−LH), where LH and UH can be computed from (9) and (21) if the total number of firms n in a market or industry is known.
For very large n and for m>1, LH,UH, and (30) can be computed from (25) or from (27) and (28) for m=4. This means that even with a large number of firms, the bounds in (25) (and (27) and (28)) still apply.
The lower bound LH follows immediately from (9) by ignoring the term involving n, while the upper bound UH can be proved using the inequality in (18). The maximum possible value of sm+1 will necessarily occur when si=CRm/m for i=1,...,m+1.
The upper bound UH is then given by UH=CRm2−sm+1[(2m−1)CRm−m(m−1)sm+1−1] for CRm≥1/m. This gives UH≤CRm2 for CRm≥1/m.
Equivalent bounds can also be derived for CRm in terms of H. The bounds are given by UC.Rm=mH≥CRm≥LC.Rm={HforH≥1/m2mHforH≤1/m2.
A formulation for CRm can be expressed as CRm=CRm1±12(UC.Rm−LC.Rm), where CRm1=12(LC.Rm+UC.Rm).
You might like: 27 an Hour Is How Much a Year
Market Shares
The Herfindahl index is directly related to the weighted average of the profit margins of firms under Cournot competition with linear marginal costs.
Market share is a crucial component in calculating the Herfindahl index, where si=qi/Q represents the market share of each firm.
In a market with n firms, the sum of all market shares equals 1, as Q is the total quantity produced by all firms.
The Herfindahl index is a weighted average of the profit margins of firms, where each firm's profit margin is calculated as (P-ci)/P.
The price elasticity of demand, η, is a key factor in determining the Herfindahl index, as it is used to calculate the profit margin of each firm.
Using real market-share data can provide valuable insights into the true values of the Herfindahl index and other related metrics, but results may depend on factors such as market classification systems and levels of aggregation.
Consider reading: Small Business Profit Margins by Industry
Frequently Asked Questions
What is a good HHI index?
A good HHI index is typically below 0.15 (or 1,500), indicating an unconcentrated industry with minimal anti-competitive effects. This threshold suggests a highly competitive market with limited need for further analysis.
Featured Images: pexels.com


